WLS-1520 Stainless Steel Electromechanical 8″ Jamb Detention Cell Door Lock

The WLS-1520 is capable of electronic or manual locking/unlocking in swinging doors in high security applications including medium and maximum security inmate confinement within institutional settings. The WLS-1520 series can be used with a standard or mogul type cylinder. This lock is typically jamb mounted within a steel door frame with a recommended minimum 15 gauge construction.

To specify fixture and accessories, use the Model Number and Options page.

Example: To specify a stainless steel electromechanical automatic cell door lock keyed one side, 24V DC and left hand reverse, use the following Willoughby Model Number: WLS-1520-K1-24V-LHR

Request a Quote For Price

Add to Quote

Product Description

Certifications: ASTM F1450 Security Grade 1 Impact Certified, ASTM F1577 Grade 1 Detention Lock, UL10C 3 Hour Fire Rated.

Standard Lock Shall Include:
•Latch with full 1″ bolt throw with a 3/4″ x 1-1/2″ cross section.
•High torque 24V DC motor or manual key unlock/relock
•24V DC operation, .25-.5 amp @ 24VDC, 2 amp max draw
•Door jamb mounted
•Ability to withstand abnormally high side loads in excess of 850 lbs
•Lock case and cover constructed from 11 ga. stainless steel
•Internal parts including strike plate are machined stainless steel, cast stainless steel and other non-ferrous alloys
•Lock status switch and motor control switches
•Full or half cycle functions available
•Internal Structural reinforcement bracket

Internal Monitoring of deadlock status achieved through a direct contact with a lock status switch. The lock status switch must be used in conjunction with a door position switch. Use of an approved door position switch ensures that the door is closed & locked when a secure signal is sent to the control source.

Additional Information

Keyed

K1: Keyed One Side, K2: Keyed Both Sides

Voltage

120 V Motor, 120 V Solenoid, 24VDC Motor

Lock Handing

LH: Left Hand Lock (In-swing Door), LHR: Left Hand Reverse Lock, RH: Right Hand Lock (In-swing Door), RHR: Right Hand Reverse Lock

Options

EHB: Electronic Hold Back w/ Remote Relock, LEK: Local Electronic Keyswitch, None, TPR: Tamper Switch, KCE: Key Cylinder Extension (Specify Frame Depth), MHB: Mechanical Hold Back

Product Documents

Technical Documents

Related Products